TheCoolist is a mood board for your headspace.

    Interior designers have stopped wrapping lights around the Christmas tree: what they do instead looks far more elegant
  1. TheCoolist
  2. Home & Garden

Interior designers have stopped wrapping lights around the Christmas tree: what they do instead looks far more elegant

You plug in the first strand, tuck the cord under a branch and start the familiar lap around the tree. By the third turn, the wire has snagged and half the bulbs are glowing at the wall. Designers start with the very same strand, they just send it in a different direction. 

Up and down, not around

Interior designers have stopped wrapping lights around the Christmas tree: what they do instead looks far more elegant
Interior designers have stopped wrapping lights around the Christmas tree: what they do instead looks far more elegant © golfcphoto

Instead of winding lights around the tree in horizontal rings, designers and visual stylists work in vertical sections. The strand climbs upward, crosses over a little, then heads back toward the floor in a loose zigzag.

No more hauling a bundle of wire around and around the tree. No more squeezing behind the couch on every pass, either. The vertical zigzag lets you dress the side that faces the room.

The result reads as soft, repeated columns of light instead of one long spiral. And in January, each section lifts off on its own, so next year’s lights are less likely to come out of the box as one tangled ball. The effect becomes clear when you flip the switch.

Why the front finally glows

Think back to those bulbs shining at the wall. Traditional wrapping treats the back of the tree like the front, even when nobody ever sees it. Working in vertical sections puts more bulbs where people actually look. A dark gap is also much easier to spot and fix.

Depth comes from placing some bulbs deep, close to the trunk, where they light up the needles and catch the shine of nearby ornaments. Others sit out at the branch tips and trace the tree’s shape. Together, they create a layered glow that looks fuller than a bright web sitting on the surface.

Those cleaner lines also leave breathing room for ribbon and ornaments. Warm white bulbs, natural materials and a light hand pair beautifully with Scandinavian Christmas decor, though multicolored lights work just as well. Getting there takes a little planning.

One column of light at a time

Before a single bulb goes on, fluff an artificial tree, or give a fresh one time to settle in its stand. Then plug in every strand on the floor. It’s far easier to spot a dead bulb now than once it’s buried in the branches.

How many lights? Bulb spacing and how bright you like it will determine the total.

Now picture the tree split into three or four vertical sections. Start at the bottom of the first one, near the outlet, and weave the strand loosely from side to side as you climb. Push some loops toward the trunk, pull others forward and hide the connectors among the inner branches.

At the top, slide over to the next section and work your way down. Keep switching direction until the visible side is covered. Then turn the lights on before any ornament goes up, step across the room and move any loop near a dark patch.

One last detail: leave the plug and connections where you can reach them, not buried under the tree skirt.

What the zigzag can’t fix

No layout makes a damaged strand safe. Follow the NFPA’s Christmas tree safety advice: use listed lights, replace worn cords and respect the maker’s limit on connected strands. Turn the tree off at bedtime or when you leave, and keep a live one watered and at least 3 feet from heat.

The method shines on a tree that stands against a wall. A tree seen from every side may still look better fully wrapped.