TheCoolist is a mood board for your headspace.

    Neither every month nor once a year: how often you should really change a water filter pitcher
  1. TheCoolist
  2. Kitchen

Neither every month nor once a year: how often you should really change a water filter pitcher

The filter in your pitcher seems to keep working forever: the water still flows, and it still looks clear. But the manufacturer gives a much more precise answer than most people think, and it depends on which filter you own.

In short

  • A standard Brita pitcher filter is rated for 40 gallons, about 2 months.
  • The Elite filter lasts 120 gallons, about 6 months.
  • Faucet filters last 100 gallons, about 4 months.
  • Hard water means changing the filter more often.

The numbers the manufacturer gives

On its replacement filter page, Brita lists a capacity for each filter:

  • Standard filter (white): every 40 gallons, about 2 months.
  • Elite filter (blue): every 120 gallons, about 6 months.
  • Stream filter (gray): every 40 gallons.
  • Faucet filters: every 100 gallons, about 4 months.

So the answer is neither “every month” nor “when the water tastes funny.” It depends on the model in your pitcher.

Why “about 2 months” is only an average

The months are estimates. Brita bases them on 11 glasses of water a day. A family that fills the pitcher several times a day will reach 40 gallons much sooner. A single person who uses it for coffee only will take longer.

Water quality matters too. The company says that if your water is hard, you should replace the filter more often. That’s the same mineral buildup that leaves white marks on faucets and kettles.

How to know without counting gallons

Most recent pitchers have an indicator. On models with a STATUS button, a flashing green light means the filter is still good, and a flashing red light means it’s time to change it. After a replacement, you reset it by holding STATUS for 2 seconds with a Standard filter, or 6 seconds with an Elite filter. On the Stream model, the light turns yellow when about 25% of the filter’s life is left.

No indicator? Brita offers a sticker indicator: you set it to the month the next change is due.


Setting up a new filter

  • Standard filter: rinse it under cold water for 15 seconds before putting it in.
  • Elite filter: no rinsing needed.
  • All pitchers: throw away the first three pitchers of filtered water, or use them to water your plants.

A pitcher is like any kitchen tool that touches water every day: what you can’t see matters, just as with the kitchen sponge many households are giving up or the fridge door tray that’s the wrong spot for eggs.

The limit

These figures are Brita’s own. Other brands use other filters and other capacities, so check the manual of your pitcher. A pitcher filter also doesn’t remove everything: Brita details on its “what we filter” page which substances each filter is certified to reduce. Past the rated capacity, the company no longer guarantees the performance. If you rely on filtered water for health reasons, ask your local water utility for a water quality report.

Two months for a standard filter, six for an Elite, and sooner if your water is hard. That’s the trick.